Pool Deck Paver Types in Pompano Beach

Travertine Pool Decks
Travertine is a natural limestone, and HomeGuide counts it among the most popular pool deck materials because it stays 20% to 30% cooler than concrete in full sun. The finish matters near water: HomeGuide lists tumbled travertine for pool decks and keeps polished stone indoors, since it gets slippery when wet. A 1.25-inch paver is the standard thickness for a deck.
- Installed around a pool: $13 to $30 per sq ft (HomeGuide)
- Tumbled pavers, material only: $7 to $15 per sq ft
- Sealing after install: $1 to $3 per sq ft

Concrete Paver Pool Decks
Concrete pavers cost less per square foot than most stone. Because each one is set separately, Fixr points out, a cracked paver can be lifted and swapped, where a poured slab has to be patched. Pick light colors: Fixr warns that dark pavers soak up heat. For base and edge-restraint questions, which work the same as on a patio, see the paver patio page.
- Paver pool patio, installed: $10 to $17 per sq ft (HomeGuide)
- Stamped concrete for comparison: $8 to $19 per sq ft (HomeGuide)
- Pavers alone: about $6 to $8 per sq ft (Fixr)

Pavers Over an Existing Concrete Deck
A sound slab can stay. HomeGuide describes half-inch travertine overlay pavers designed to go over existing concrete, which saves both material and labor compared with a full tear-out. The old deck has to drain away from the pool already, so ask the installer to check its slope before quoting an overlay.
- Half-inch overlay travertine, material: $5 to $10 per sq ft (HomeGuide)
- Resurfacing a concrete deck instead: $3 to $12 per sq ft (HomeGuide)
- Removing the old deck first: about $5 per sq ft more (HomeGuide)

Coping and Pool Edges
Coping is the ledge that caps the pool wall all the way around. On a travertine deck it is usually bullnose stone, rounded on the water side, and priced by the linear foot, so the pool's perimeter sets this line of the quote more than the deck size does.
- Bullnose travertine coping: $20 to $40 per linear ft installed (HomeGuide)
- 80 to 160 ft of pool edge: $1,600 to $6,400 (HomeGuide)
- General coping figure: $40 to $50 per linear ft (Fixr)

Why Pompano Beach homeowners call Pompano Landscaping
- One independent landscaper calls back, not a list of five
- You pay nothing to send a request
- Ask for plant species, sizes and sod square footage on the quote
- Ask who books the 811 locate and pulls any tree permit
What Moves a Pool Deck Quote
HomeGuide sizes a typical pool deck at 400 to 1,000 square feet, so area sets most of the price. The rest comes from:
Drainage grading
$500 to $1,500 on most pool deck jobs (HomeGuide). Water should run off at a quarter inch per foot, away from the pool (Fixr).Stone grade
Commercial-grade travertine starts around $5 a square foot for material; select or honed grades reach $18 to $30 (HomeGuide).What comes out first
Old surface removal adds $2 to $5 a square foot (HomeGuide).Sealing
Ask whether the first coat is included.
Pompano Beach's code-compliance handbook lists a patio slab among the jobs that need a building permit and asks owners to call the Building Inspections Division before work starts. Ask the installer who checks this for your deck and who files if a permit is needed.
From Measure to Finished Deck
STEP 01
Measure and quote
The installer measures the deck and the pool perimeter, checks the slope of what is there, and prices tear-out, overlay or new base separately.
STEP 02
Utility locate
Base work means digging, so it waits for a Sunshine 811 locate at least two full business days ahead.
STEP 03
Base and laying
At HomeGuide's 100 to 200 square feet a day, a mid-size deck takes a few working days, coping included in the quote's schedule.
STEP 04
Seal
The stone is sealed once the pavers are set. Planting around the finished deck is covered on the pool landscaping page.
