Retaining Wall Types in Pompano Beach

Segmental Block Walls
Segmental walls stack interlocking concrete blocks with no mortar, and HomeGuide calls them the most popular choice for homes because they go up quickly and tolerate slight ground movement. Without added reinforcement they handle walls up to 3 to 4 feet.
- Segmental wall: $15 to $35 per sq ft of face (HomeGuide)
- Concrete block wall: $15 to $40 per sq ft (HomeGuide)

Poured Concrete Walls
Poured concrete is the strongest option in HomeGuide's table and can be stamped, stained or carved. It needs professional installation and lasts 50 to 100 years. For walls over 4 feet the usual design is a cantilevered wall: reinforced concrete on an L-shaped footing that reaches under the retained soil.
- Poured concrete wall: $20 to $45 per sq ft (HomeGuide)
- Concrete walls generally, poured, split-face or CMU: $30 to $50 per sq ft of face (HomeAdvisor)
- Cantilevered wall over 4 ft: $40 to $80 per sq ft (HomeGuide)

Raised Planter and Brick Walls
Low walls make level ground for a garden bed or patio. Brick is often a single-wythe veneer over a block or poured core; HomeAdvisor says solid brick suits walls up to about 4 feet, with two wythes recommended above that. Cap stones finish the top.
- Brick retaining wall: $30 to $60 per sq ft, often a block core with brick face (HomeGuide)
- Cap stones: $5 to $15 each (HomeGuide)
- Stone or brick veneer on another wall: $5 to $25 per sq ft (HomeGuide)

Natural Stone Walls
Stone runs from inexpensive gabion baskets to stacked stone and limestone, and its price swings with the stone. It is also the longest-lived option in HomeGuide's lifespan table.
- Natural stone wall: $20 to $95 per sq ft (HomeGuide)
- Stone walls generally: $5 to $100 per sq ft, gabion to stacked limestone (HomeAdvisor)
- Lifespan: 100 to 200 years (HomeGuide)

Why Pompano Beach homeowners call Pompano Landscaping
- One independent landscaper calls back, not a list of five
- You pay nothing to send a request
- Ask for plant species, sizes and sod square footage on the quote
- Ask who books the 811 locate and pulls any tree permit
Retaining Wall Height, Engineering and Permits
HomeGuide's line is 4 feet: taller walls need extra engineering, permits and deeper foundations, and that pushes the price up sharply.
Engineering
A structural engineer's design for a wall 4 feet or higher costs $500 to $2,000 or more (HomeGuide).Permits
Most cities require one for walls over 3 to 4 feet, at $50 to $450 (HomeGuide). Before any wall goes up, call the city's Building Inspections Division to ask whether yours needs one; its code-compliance handbook says to check first.Trees
The landscape code the city posts calls for retaining walls and drywells to protect preserved trees from severe grade changes, and for masonry wall footers to stop and bridge where major roots are found. Check the city tree permit first if a wall runs near a tree.Digging
Footings mean excavation, so book a Sunshine 811 locate first.Waterfront
Sheet piling, interlocking sheets driven into the ground, works well in waterfront spots (HomeGuide), and the city lists seawalls among jobs that need a permit. HomeAdvisor adds that galvanized steel lasts longest of the metal options in coastal settings.
Drainage and the Other Lines on a Wall Quote
HomeGuide says every retaining wall needs drainage, or water pressure builds behind it until it bows, cracks or fails. The basic setup is perforated pipe at the base, gravel backfill and weep holes.
Drain behind the wall
$10 to $85 or more per linear foot (HomeGuide). For yard-wide water problems, see French drains.Footings for taller walls
$18 to $55 per linear foot (HomeGuide).Labor
40% to 60% of the total, at $50 to $75 an hour (HomeGuide).Upkeep
Clear the weep holes once a year and look for cracks, bulging or water stains (HomeGuide).
For a low edge that only separates bed from lawn, landscape curbing costs far less than a wall.
